Unigreen Master UMP 50 Manuel de l'opérateur Page 18

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 21
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 17
Page 17
Optional Equipment
Foam Markers
All Silvan linkage sprayers can be fitted with 14L or
30L Foam markers. Refer to the Foam Marker
Operator’s Manual for installation and operating
procedures relevant to the type of marker fitted to
your sprayer.
Boom End Taps
The end tap is a simple 1/2” BSP connection and
on/off tap with hose elbow which can be screwed
into the end of the boom sprayline to allow direct
flushing of any chemical residues after spraying is
finished. Before resuming spraying ensure that the
ta
p
is closed to avoid loss of chemicals.
Boom Fence Line Kit
The fence line kit includes a 1/2” BSP connect- ion,
on/off tap and adjustable swivel nozzle holder
which can be screwed into the end of the boom
spray line to direct chemical to the base of a fence
without the risk of the boom contacting. It can be
fitted in conjunction with an end tap.
Boom Height Skimmer
Skimmers can be easily fitted to any Silvan boom
to help maintain a uniform spraying height over
uneven terrain and are normally fitted in pairs at
the same location on each side of the boom.
Drill the outer arm section of the boom at the
required location and attach the mounting bracket
with two bolts. Install the skimmer in the bracket
and adjust so that it is in light contact
with the ground at the required spraying height.
Dual Stage Pressure Gauge
The dual stage gauge features an expanded
scale of dial markings at the low pressure end to
enable accurate setting of both high and low
operating pressures. It is standard equipment on
Prolink and Paddockmaster sprayers and is
available as an option for all other models.
Cabin Mounted Boom On/Off Control
This cabin control can be used with 3 section
spray booms to enable spraying to be stopped
and started from the tractor seat by operation of
electric solenoid valves. Each boom section can
be selected individually by operating one of the
“on/off” switches. When this option is ordered the
solenoid valves are factory fitted.
Install the control unit in a convenient location in
the tractor cabin using the hardware provided.
Connect the electrical cable provided directly to
the battery. The connections are:
Positive = Red or Brown
Negative = Black or Blue
If the cable needs to be extended it is important
to use wire of the same diameter.
Run the control loom to the sprayer through a
convenient outlet in the tractor cabin ensuring it
BOOM END TAP
BOOM FENCE LINE KIT
Tighten the two clamping screws firmly.
BOOM HEIGHT SKIMMER
DUAL STAGE PRESSURE GAUGE
Vue de la page 17
1 2 ... 13 14 15 16 17 18 19 20 21

Commentaires sur ces manuels

Pas de commentaire